TW series 3-way ball valves are available in ½" to 6" sizes in either PVC or CPVC materials with either FPM or EPDM o-rings. The inlet for the TW series 3-way ball valve is the port directly below the diverting handle and thus rotating the handle diverts the flow to the left or right. This design is very similar to the LA series 3-way ball valves, except the inlet port is located perpendicular to the operating handle. The choice between the TW and LA configurations is usually dictated by where you want the operating handle to be; for actuate valves the actuator should be installed vertically with the underlying valve body and piping supporting the weight of the actuator.
We can provide these valves "actuator ready" with a bracket and coupling to mount with an actuator of your choosing; if we provide the actuator, the factory will assemble and test the valve without an additional charge for the bracket, coupling or testing procedure.
Valve repair without breaking down pipeline
Full port design
Reversible PTFE seats
Double o-ring stem seals
NSF/ANSI 61 listed
Cross-flow, NT or TP diverter balls